Metal roofs built for Wisconsin winters
The fastest-growing residential roof in Wisconsin — 24-gauge steel, Kynar 500 finishes, 50-year lifespan, and the best snow-and-ice performance you can buy.
Why standing seam metal makes sense in Wisconsin
Wisconsin's heavy snow loads, ice dams, freeze-thaw cycles, and summer hail are exactly the conditions standing seam was designed for. The hidden-fastener system has no exposed screws to back out, the smooth painted surface sheds snow before it can build into ice dams, and a 24-gauge panel will shrug off hail that would total an asphalt shingle roof.
Specs we install
24-gauge (heavy residential) or 26-gauge
Galvalume steel or aluminum (lake-adjacent)
Kynar 500 / PVDF — 30–40 yr paint warranty
1.5" or 1.75" mechanically-seamed or snap-lock
Self-adhered high-temp ice & water shield
Color-matched ridge, hip, valley, gable, eave
Standing seam vs architectural shingles
A standing seam roof costs about 2–3x what an architectural shingle roof costs, and lasts about 2–3x as long. If you plan to be in the home long term, the cost-per-year math usually favors metal — and you avoid the second tear-off that an asphalt roof will need at the 20–25 year mark.
Areas we install
Standing seam metal roof installation across Dodge County (Beaver Dam, Watertown, Mayville, Horicon, Juneau, Waupun), Fond du Lac County, Washington County, Ozaukee County, and Waukesha County. Local Wisconsin contractor based in Brownsville.
Frequently Asked Questions
Most residential standing seam installations in SE Wisconsin run roughly $14–$22 per square foot installed, depending on panel gauge (24-ga vs 26-ga), color/finish (Kynar 500 vs SMP), trim complexity, and roof geometry. Expect total project cost in the $25,000–$60,000 range for a typical home — about 2–3x an architectural shingle roof, with 2–3x the lifespan.
Considering a metal roof?
Talk to a local Wisconsin standing seam installer — no high-pressure pitch, just real numbers.